WARNING
Following the use of the function "Erased data in the instrument"
If you connect the instrument to the computer, following the previous procedure,
it will also indicate that the instrument contains data.
THIS IS NORMAL.
When the instrument lights up in the car, it will start to format its internal memory.
Only then will the data be erased completely.
This may take a few minutes.
In this mode, the device will not be functional.
If you start rolling, the instrument will not record.
DO NOT DISCONNECT THE TL1000 for at least 3 minutes
Once the memory is "formatted", the instrument will connect to the satellites to get a connection.
WHY?
In case you have done a wrong maneuver, you can return the delete command,
as long as you don’t plug it into the car.
More info HERE
For more information, please consult How to erase data from the TripLogik TL1000 instrument