WINDOWS 10 et 11
Windows 10 contains a widely documented "bug" about USB3 ports not always detecting the devices
which are connected to it.
What can this do to the Manager :
- Unable to connect to the instrument
- Instrument shut down while transferring data
- Intermittent instrument connection
Why is your device not powering up or turns off ?
The problem is caused by Windows 10 ( and 11) which can power down devices on your USB 3 to put them in sleep.
This situation has for consequence to cut the supply to the device and turn it off, even if its in the list of devices still connected.
Once windows has turn OFF the TripLogik, it shows an error, it cant recognize the device !
Our solution ( because Microsoft has none ! )
It is possible to deactivate this function by using the registry editor. This is generally performed by an IT specialist, or at least an experience user.
This leads us to create an application which allows to make these manipulations for you in a few clicks and without any computing knowledge.
Follow the instructions below to do this!
Close all other application using the USB , such as the Manager
Connect your instrument in the USB port of your PC
It is possible that the LED turns ON and goes off or that it remains lit.
If an error message displays, simply close the window for the moment.
Using a different port can also help , if it dosent work, try a different port or cable.
- Download the Windows10 updater utility on your desktop https://www.triplogik.com/download/Manager2/Util/Signed/Windows10USB3PMUpdater.exe
Main download link here Windows10USB3PMUpdater.exe
Alternative download link here Windows10USB3PMUpdater.exe
- Start the software from the hard disk or desktop, where ever it was downloaded , DO not start it in the browser .
This software must be started in administrator mode
Thus make sure you have administration rights on your PC.
If you are not certain, simply right click with the software icon
A menu will appear. Selected the second option "Run as administrator "
If you don't have administration privileges, your computer will prevents you from running the software
In this case please ask your IT administrator to run it for you.
If you get a security warning message like the following image.
Click "Run" to continue
When the software starts
- 1) Select the language to use ( from the flags)
- 2) Accepted conditions of use ( select I agree )
- 3) Click on OK
If you had already connected your device (several minutes before)
- 1) The software will show the serial number of your TripLogik and it will already be selected.
- 2) If it is not the case, connect your device and click Refresh
- 3) If your device is shown, click Run
If the application has successfully modified your settings, a green check-mark will display next to your serial number.
You can click the "Exit" to close the application.
Further to this modification, Windows 10 will not deactivate the device any more
This modification ONLY affects the TripLogik USB connection and cannot settle any other communications problem with other devices using USB3 on windows 10
Disconnect the TripLogik from your computer, wait 3 seconds and reconnect it.
Your device can now remain ON permanently and will prevent Windows 10 from deactivating it.
This will effectively prevent Windows from turning OFF the device and creating itself an "unknown devices error"
ATTENTION Manager 2.0 is not supported Windows 8
Windows 7 will not be supported anymore when Microsoft stop supporting it January 14, 2020
This situation can be caused by windows updating it's USB drivers in Win 7 or 8
If the device was never connected on the PC or it was possibly on a different USB port,
Windows will try to verify the validity of its USB driver, and in some case it can take as long as 5 minutes.
TripLogik does not use a particular driver. It uses the standard of included in Windows.
On most recent updates of windows, you need to leave Windows a longer time to find or validate its driver the first time you plug in the TripLogik
Please note Windows needs to have access to the internet in order to access to its diver updates.
To verify and see the process is happening in the background, click the arrow in the bottom right ( close to the clock)
Select the device USB discoveries icon (Do not confuse it with ejecting a device icon)
The USB discovery is usually animated
This will open the window Driver information
The green circle will turn to indicate that Windows is looking for its driver or its update
When Windows will have identify his own driver, it will install it automatically
When Windows end its update, the USB driver will say "Ready to use"
The blue LED of the device will turn ON.
If it is not immediately the case, simply disconnect the TripLogik for 3 seconds and to reconnect in the same USB port